American Weigh AMW-Card User Manual - Page 3

Browse online or download pdf User Manual for Scales American Weigh AMW-Card. American Weigh AMW-Card 5 pages. 250g x 0.1g

Print Page
American Weigh AMW-Card User Manual
I. Operation
Place the scale on a horizontal flat surface.
1. Press ON/OFF key.
2. Wait until [0.0] is displayed.
3. Put the object(s) on the weighing platform.
4. Using the MODE key, you can switch between the weighing
units.
II. Tare Weighing.
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press TARE and wait until [0.0] is displayed.
4. Add the "net-weight-item".
III. Calibration
Special Calibration- If the display shows [OUE2] after turning
on:
1. Turn OFF the scale.
2. Press ON/OFF key briefly then immediatley press and hold
the MODE and TARE buttons simultaneously until [CAL] is dis-
played. Release the MODE and TARE buttons and a random
internal statement number will be displayed.
3. Press the MODE key once and the display will show [2Ero].
4. Place a 200g weight on the center of the platform. Wait 2
seconds then press MODE key again. The LCD will display
[PASS] then [200.0].
5. Remove the weight and turn off the scale. Special Calibra-
tion is complete.