Donn Steward CPUville 8-bit Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Monitor Donn Steward CPUville 8-bit. Donn Steward CPUville 8-bit 14 pages. Processor register display kit

Print Page

Here is a little trick for getting a long row of LEDs to line up nicely, that is, to stand up straight.

The bottom of the LED base is flat, so go down a row, soldering only one lead of each LED

while pressing down on the board. That way flat bottom of the base will help the LED to stand

upright. Then, before soldering the other lead, bend each LED in the row to get them lined up

well. Then solder the second lead.

4. The IC sockets are next. They do not need to be oriented.

5. The 50-pin display connector is next. No orientation is necessary, but it has fairly large leads

and may require more time and/or soldering iron wattage to solder.