Astone i-P22 User Manual - Page 12

Browse online or download pdf User Manual for Docking Speakers Astone i-P22. Astone i-P22 15 pages. Astone i-p22 docking station: user manual

Print Page

Cracking sound

from speakers

Crackling sound

from speakers

(when connected

to PC or laptop)

Sound is distorted

3.5 mm i-P22 stereo cable isn't

connected to an audio source

3.5 mm stereo cable is

connected to incorrect output

on audio source

A problem with audio source

Incorrect connection

A problem with your audio

source

Volume level in operating system

is set too high

Volume level on i-P22 system is

set too high

Sound source is distorted

Connect the 3.5 mm stereo cable to the audio

source. Make sure the signal cable is inserted firmly

into the correct jacks

Make sure the 3.5 mm stereo cable is connected

and fully inserted in the "line-our" "audio out" or

the headphone jack on your sound card or other

audio source

Test the speakers by using another audio source

(e.g. portable CD, cassette player or FM radio) and

by connecting the 3.5 mm stereo cable through

i-P22 system

Check if iPod is properly seated in the docking

station. Check connection of the 3.5mm stereo

cable if not using the docking station. Make sure it

is connected to "Line out", "audio out", or the

headphone jack on your sound card or other audio

source – and NOT "speaker-out"

Unplug the 3.5mm stereo cable from the audio

source. Plug the cable into the headphone jack of

an alternate source (e.g. Walkman, Discman or FM

radio)

Check the operating system volume level and

decrease it if necessary

Decrease the volume

WAV and MID files are often of poor quality;

therefore distortion and noise are easily noticed

with high-powered speakers. Try a different audio

source such as a music CD