Astone i-P22 User Manual - Page 8

Browse online or download pdf User Manual for Docking Speakers Astone i-P22. Astone i-P22 15 pages. Astone i-p22 docking station: user manual

Print Page

Remarks: The output of using power adapter is twice as great as the output of using battery.

When docked, your iPod will also recharge when using the AC adapter.

START PLAYING

Slide power switch

Select and play your favorite music using your iPod.

The

buttons on the front panel are the master volume controls for the i-P22 system. Press and hold "+"

to increase the volume and then "-" to decrease the volume. The volume will start at 40% maximum volume

position every time you re-start your i-P22 system. This will avoid disturbing others when booting it up.

To minimize power consumption, slide power switch to OFF

If your i-P22 is not to be used for an extended period of time, remove the AA batteries from i-P22. Please note that

the i-P22 has an "AUTO SHUT-DOWN" (STANDBY) function which prevents excess power consumption during idle

play.

When the power switch is set at the "AUTO ON" position, the i-P22 system will shut down automatically and goes

into standby mode if an audio signal is not detected within 5 minutes. The LED on the power switch will then turn

to green and blink. The LED will automatically stop blinking

i-P22 system will automatically power on. Power consumption will be reduced in this "standby" mode, but we

suggest that you set the power switch to the "OFF" to shut down the i-P22 system completely when not in use for

an extended period of time to save battery life.

to the right for "AUTO ON" and note that the power indicator will illuminate.

when you are no longer using the device

when an audio signal is detected and the