Donner Force 2 Owner's Manual
Browse online or download pdf Owner's Manual for Amplifier Donner Force 2. Donner Force 2 2 pages.
Print Page
Owner's Manual
Introduction
The Digital Mini Preamp series Force 2
is a compact stompbox that reproduces
the clean and crunch tones of a classic
hard rock amplifier.
Precautions
READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a convenient
place for future reference.
Power Supply
Always use a DC 9V center negative AC
adapter. Use of an adapter other than
that specified could damage the unit or
cause malfunction and pose a safety
hazard.
Always connect the AC adapter to an
AC outlet that supplies the rated voltage
required by the adapter.
Disconnect the AC adapter from the AC
outlet when during lightning storms or
not using the unit for an extended
period.
Connections
Always turn off the power before
connecting or disconnecting. Make sure
to disconnect all cables and AC adapter
before moving the unit. This will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the
following conditions that could cause
malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or
exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to
interference or that emits powerful
electromagnetic waves (e.g. radios and
TVs) should not be placed near this unit,
as interference could occur.
Electromagnetic interference could
cause malfunction and could corrupt or
destroy data.
Always operate this unit at a suitable
distance from these devices.
Handling
Do not apply excessive force to the
switches and other controls, exposing
the unit to strong impacts, which could
cause it to break.
Do not put foreign objects or liquids into
the unit.
Never open the case or attempt to
modify the product in any way since this
can result in damage to the unit.
Clean only with a soft, dry cloth.
Overview
●Selectable amp tones
With two classic amplifier models, the
Soldano SLO 100* Normal and
Overdrive channels, this preamp allows
you to toggle between both clean and
crunch channels using a single
footswitch.
●Easy, flexible controls
With a three band EQ and gain and
volume control, adjusting this pedal is
just like working with an amplifier. The
on-board reverb is a bonus to give your
tone more depth. Optional CAB SIM lets
you add a cab simulator to the tone.
●Two-mode footswitch
The footswitch can be configured as an
on/off switch or an A/B channel switch.
●Carefully selected components
The Force 2 pedal was designed and
manufactured with quality components
for optimal sound and sturdy
performance. The aluminum alloy
casing and all metal footswitch ensure
road worthy reliability.