Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Artificial Pine Trees Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE. Donner & Blitzen 6.5FT WESTCHESTER SLIM CASHMERE PINE 3 pages.

Print Page

REPLACEMENT PARTS LIST

Part

Description

Part #

Fuses

W14T0288-F

Bulbs

W14T0288-B

FUSE REPLACEMENT

This product comes with an overload protection (fuse). A blown fuse indicates an overload or short circuit. If a

fuse blows, unplug tree from wall outlet. Replace the fuse as per the fuse replacement instructions below

(follow product marking for proper fuse rating). If the fuse blows, a short circuit may be present and the

product should be reviewed to determine the cause.

A) Light set fuse replacement (replaceable 3-amp 125V fuses are located in plug)

1. Grasp plug and remove from its power source (Illustration.1).

2. Locate blown fuse(s) by sliding access cover on top of plug towards prongs.

3. Remove blown fuse (s) by turning the plug over. Fuses should fall into your hand

(Gentle tapping may be required).

4. Replace blown fuse(s) with spare replacement fuse. Close fuse cover by sliding fuse access cover towards the

cord.

BULB REPLACEMENT:

1. Grasp plug and remove from its power source

2. Pull bulb AND plastic base straight out of socket. Do not twist bulbs.

3. Replace burned bulb with 2.5 volt 0.425 watt bulb ONLY. (Additional bulbs are included for your convenience).

Caution

To reduce the risk of fire or electric shock, do not attempt to modify string.

The fusible bulb (with white lampbase) is located in the second position of each individual circuit. Replace the

burned fusible bulb with the same white lampbase replacement bulb after unplug.

BASIC PRECAUTIONS SHOULD BE FOLLOWED WHEN USING THIS PRODUCT:

(Inspect product carefully before using or re-using):

1. This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury and electrical shock it

should not be played with.

2. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.

3. Do not cover product with cloth, paper or any material when product is in use.

4. Do not hang ornaments or other objects from cord, wire, or light string. Hang ornaments only on the tree

itself.

5. For your safety, unplug the product when leaving the house, retiring for the night, or if left unattended.

6. Do not let bulbs rest on the supply cord or on any wire.

7. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.

8. Should you discover any of the following: a) cut, damaged, or frayed wire insulation; b) cracks in the

sockets; c) loose connections or exposed wires, please call us.

STORAGE: When storing the product, carefully remove the product from wherever it is placed, including trees,

branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.

Disassembled tree can be stored in its original box. Store tree in a cool dry place where the temperature

does not exceed 100 degrees Fahrenheit.

Illustration.1