Astonica 50102306 Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Indoor Furnishing Astonica 50102306. Astonica 50102306 2 pages. Straight back slat park bench

Print Page
Astonica 50102306 Instruction Manual
PARTS & HARDWARE LIST
PART #
A
Cast Iron Legs
B
Back Rest
C
Wooden Slat
D
Rounded Slat
E
Slat Support
F
Leg Support
G
Wood Screw
H
Bolt
Bolt
I
Washer
J
Nut
K
A
H
G
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-422-7800.
Caution: Do not over tighten fasteners.
DESCRIPTION
QUANTITY
B
C
D
E
F
I
J
1. (SEE FIGURE 1) Using Bolts (H) washers (J)
2
and nuts (K) attach one end of the bench
back (B) to the cast iron leg (A).
1
Attached the other end of the back to the
4
second cast iron leg (A).
1
1
2
7
14
2
14
14
2. (SEE FIGURE 2) Attach the wood slats (C)
to the cast iron leg (A) as shown. Using
bolt (H) washer (J) and nut (K). Repeat on
the other side and do not tighten bolts until
all wood slats (C) and (D) are in place and
bench is at 90 degrees with floor.
Note: Wooden slat (D) is to be positioned at
the front of the bench as shown.
3. (SEE FIGURE 3) Turn the bench over on a
non-scratch surface and attach middle
support bracket (E) to the slats (C) and (D)
at the midway point between legs (A) using
K
wood screws (F). Work from the top to
bottom, bending bracket (E) as necessary
to fit the contour of the bench. Attach leg
supports (F) to cast iron legs (A) using bolt (I)
washer (J) and nut (K). Attach other end of
leg support (F) to wood slat (C) with wood
screws (G)
ASSEMBLY INSTRUCTIONS
FIGURE 1
K
J
A
FIGURE 2
FIGURE 3
I
H
B
A
H
J
K
C
D
E
G
F
J K