DAB NOVA Instruction For Installation And Maintenance - Page 6
Browse online or download pdf Instruction For Installation And Maintenance for Water Pump DAB NOVA. DAB NOVA 13 pages.
Also for DAB NOVA: Owner's Manual (8 pages)
Print Page
CONTENTS
1.
WARNINGS
2.
RESPONSIBILITY
3.
DIMENSIONS AND WEIGHTS
METHOD OF USE
4.
5.
6.
7.
8.
1.
WARNINGS
1.1
Read this documentation and the documentation supplied in the pump manual carefully
before installation.
It is indispensable to have the electrical and hydraulic connections made by skilled personnel
in possession of the technical requirements indicated by the safety regulations in force in the
country in which the product is installed.
Failure to comply with the safety regulations not only causes risk to personal safety and
damage to the equipment, but invalidates every right to assistance under guarantee.
1.2
The term skilled personnel means persons whose training, experience and instruction, as well
as their knowledge of the respective standards and requirements for accident prevention and
working conditions, have been approved by the person in charge of plant safety, authorizing
them to perform all the necessary activities, during which they are able to recognize and
avoid all dangers. (Definition for technical personnel IEC 364).
The appliance is not intendend for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsable for
their safety. Children should be supervised to ensure that they do not play with the appliance.
1.3
Check that no damage has been done during transport or storage. In particular, ensure that
the external casing is perfectly entire and in excellent condition; check the efficiency of all
the tank components and, if necessary, replace any parts that are not in perfect working order.
2.
RESPONSIBILITY
The Manufacturer does not ensure good operation of the circulator if it is tampered with or modified or made
to operate at values beyond the data on the plate.
The Manufacturer also declines all responsibility for possible errors in this booklet, if due to misprints or
errors in copying. The company reserves the right to make any modifications to products that it may
consider necessary or useful, without affecting the essential characteristics.
3.
DIMENSIONS AND WEIGHTS
The adhesive label on the package indicates the total weight of the system. The dimensions are given on
page 11
4.
METHOD OF USE
NOVA BOX is a pre-assembled system, ready for installation, without any need of regulation, ideal for
collecting and disposing of domestic waste from basement premises, located below the level of the sewage
network.
It is NOT suitable for conveying waste sewage and corrosive liquids.
Max. liquid temperature: 50°C continuous - up to 90°C for maximum 3 minutes.
In accordance with the accident-prevention regulations in force, the NOVA BOX may not be used for
conveying inflammable or explosive liquids, such as petrol, diesel fuel, fuel oil, solvents, etc.
5.
INSTALLATION
5.1
The NOVA BOX is supplied with a NOVA 300 pump that is not connected to the tank couplings.
5.2
For the part references concerning assembly, see the assembly diagram on page 12
ENGLISH
9
Page
9
9
9
9
9
10
11
11
41
42