Acer XB323UGX User Manual - Page 28
Browse online or download pdf User Manual for Monitor Acer XB323UGX. Acer XB323UGX 35 pages.
Print Page
Adjusting the Gaming
1.
Press the MENU key to open the OSD.
2.
Using the Navi/OK button, select Gaming from the OSD. Then navigate to
the setting you wish to adjust.
3.
Use the Navi/OK button to adjust any sliding scales.
4.
Over Drive: Select Off, Normal, or Extreme.
Note:
1.
If Adaptive-Sync is "ON", then the Over Drive selection is set to
"Normal" automatically
2.
If Adaptive-Sync is "OFF", then the user can set Over Drive to
either one of the three settings including: (a) Extreme (b) Normal
(c) Off
5.
Adaptive-Sync: To control supporting Adaptive-Sync or not; the default is
On.
Note: Adaptive-Sync provides artifact-free performance. It is
compatible with both Nvidia G-Sync and AMD FreeSync technologies
when used in combination with select Nvidia/AMD graphics cards.
6.
Refresh Rate Num: Display the panel's current refresh rate on the screen.
7.
Ultra-Low Latency: Select On to speed up the processing time of the
display switching process.
Note:
1.
If Adaptive-Sync is "ON", then the Ultra-Low Latency is
automatically turned On and grayed out.
2.
Ultra-Low Latency is not supported at resolutions below 800 x
600.
EN-18