Door Knox VDP103 Manual - Page 7

Browse online or download pdf Manual for Intercom System Door Knox VDP103. Door Knox VDP103 15 pages.

Print Page

2.5.2

Adding using the Add Card

Swipe the master add card or fob 3 times within 10 seconds (2 beeps, 2 beeps, 3beeps). The

name panel will flash slowly.

Swipe the card or fob that you wish to add (double beep). Keep swiping cards or fobs until

you have finished adding.

To exit adding mode swipe the master add card or fob again(single beep) or wait for 1

minute.

4 beeps indicates that it has failed.

To exit adding mode swipe the master card again(single beep) or wait for 1 minute.

Note: Cards and fobs added this way can only be deleted using the card or fob or else all cards

and fobs will have to be deleted.

2.6

Depending on the

The user can add a PIN themselves as admin mode is not required.

Press *swipe card or fob(double beep) oooo# (double beep, name panel will flash) nnnn#

(single beep) nnnn# (single beep, name panel stops flashing.)

Note: nnnn = new 4 digit PIN

oooo = old PIN when changing PIN or the default PIN of 0000 when adding a PIN for

the first time.

2.7

Deleting using the Delete Card

Deleting All Cards

2.7.1

Deleting using the Admin Pin

In admin mode:-

Deleting a single card or fob and PIN using the user id - press 2nnn# (double beep).

Deleting a single card or fob and PIN using the the card or fob - press 2 swipe card or fob

(double beep).

4 beeps indicates that it has failed.

To delete all cards at the same time see

Note: nnn = User No. between 001 and 199.

unlock mode

the PIN can be used instead of or with the card or fob.

Deleting All Cards and Fobs

Programming