Astra 6731i User Manual - Page 8
Browse online or download pdf User Manual for IP Phone Astra 6731i. Astra 6731i 20 pages.
Welcome
Requirements
The 6731i IP Phone requires the following environment:
•
SIP-based IP PBX system or network installed and running with a SIP account created for the 6731i IP phone.
•
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server,
or HyperText Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).
•
Ethernet/Fast Ethernet LAN (10/100 Mb) (Gigabit Ethernet LAN (1000 Mbps) recommended)
•
Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet
performance
•
Power source
–
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af ):
–
For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No 48v AC power
adapter required.)
–
For Ethernet networks that DO NOT supply power to the phone:
–
For power, use the 48V AC Power Adapter (optional equipment - not included) to connect from the DC power port on the
phone to a power source.
or
–
(optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is available as an
optional accessory from Aastra Telecom. Contact your Administrator for more information.
Installation and Setup
If your System Administrator has not already setup your 6731i phone, please refer to the Aastra 6731i Installation Guide
for basic installation and physical setup. For more advanced administration and configuration information, System
Administrators should refer to the Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.
2
41-001387-00 Rev 00 – 01.2011