Door Knox VDP400 User Manual - Page 8

Browse online or download pdf User Manual for Intercom System Door Knox VDP400. Door Knox VDP400 13 pages. Wireless external door entry kit

Print Page
Door Knox VDP400 User Manual
Doc XVDP400
VDP404 Door Entry Monitor
Functions settings can be divided into the following parts: Language setting,
Time and Date setting, Ringtone setting, Unlock time setting, Screen brightness
setting etc. Press UNLOCK button to confirm and enter into the
next setting page, press TALK button to save the setting for one part and then
exit.
1. Language setting: When the screen is on, press UNLOCK button to enter
Function settings. The first part is language setting, including Chinese and
English, press the (+ -) button to select language. The default language is English.
2. Date and time setting: When the screen is on, press UNLOCK button to enter
Function settings. Press UNLOCK button again to enter Date and Time setting,
press Photo taking button to select and press the (+ -) button to amend the value.
3. Ringtone setting: When the screen is on, press UNLOCK button to enter Function settings,
press the UNLOCK button twice to enter ringtone setting mode. Press Plus button (+) to select
next ringtone and press Minus button (-) to adjust the volume. There are 25 ringtones for
selection and there are 3 levels of ringtone volume.
4. Unlock time setting: When the screen is on, press UNLOCK button to enter
Function settings. Press the UNLOCK button 3 times to enter Unlock time
setting mode. Press the (+ -) buttons to adjust the value. The unlock time can be set from 1
second to 6 seconds and the default value is 1 second.
5. Mute mode setting: When the screen is on, press the TALK button for about 3seconds and
the green music button (
) will turn into red button (
) which means mute mode. Under
mute mode, the indoor unit can work normally but will not ring when there is a call. Press
and hold the TALK button for 3seconds to cancel the mute mode.
6. Brightness and Chroma setting/ Talking volume setting: In talking mode, press
MONITOR button to select brightness, chroma and talking volume setting. Press the (+ -)
button to adjust the value. The value of them can be set from level 0 to level 7.
Email:
Last Revised: 13/07/2017