Akva Nordic with headboard Manual - Page 3
Browse online or download pdf Manual for Indoor Furnishing Akva Nordic with headboard. Akva Nordic with headboard 4 pages. With headboard
Print Page•
The headboard is fitted with one angle bracket at each corner and two secured to the base.
•
The lower part of the cover is positioned with the AKVA logo at the foot end. The top cover
is zipped off and put aside. The fixing paddles are put through the holes in the lower part of
the cover and fixed to the bottom plates.
•
At first the long sides of the foam frame are placed in the cover, then the head and food end
parts.
Modulex has sloaping sides, and Modulex Q has straight sides.
Note: The thin section is placed by the headboard.
•
The heater(s) is positioned, and the wire is led under the foam frame and through the hole
in the lower part of the cover. (See assembly instructions Akva Vital Electronics heater
before installing the heater.)
•
The safety liner Zipliner is placed in the bed and zipped onto the cover.
•
If this is a bed with a dual mattress system the divider is now placed in the middle.
•
The water mattress(es) is placed in the safety liner. (See instructions for water mattresses.)