Dabi Atlante Bellagio Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Dental equipment Dabi Atlante Bellagio. Dabi Atlante Bellagio 10 pages. Refletor led

Print Page

Maintenance

Preventive maintenance
In order to reduce equipment faults and increase
durability,
call
Technical Assistance and set a regular preventive
maintenance plan.
Corrective maintenance
In case the equipment presents any faults that are
not listed in "Troubleshooting", contact Dabi Atlante
Authorized Technical Assistance.
Do not open the equipment and/or try to repair
it as such action may aggravate the problem or
even generate further malfunctioning.
Circuit diagrams, list of parts, components,
others
In case they are necessary, ask Dabi Atlante for electric
diagrams and/or lists of parts, components or other
information, which will be supplied by agreement.
Recommendations and care
Cleaning the Handle Cover
Press the lock (item 1, fig. D) and pull the handle
cover (item 2, fig. D).
Led light bulb replacement
Turn off the main switch on the chair base. Make
sure that the reflector has cooled off. Remove the
Led light bulb cover by turning it
clockwise (fig. E).
Disconnect the terminals from the led light bulb
wire (fig. F).
Use a 1/8" Phillips screwdriver to loosen screw which
is connected to the led light bulb (fig. G).
Remove the burned out led (fig. G).
Insert the new led and follow the opposite sequence
to disassembly.
Procedures in case equipment
functioning is altered
In case the equipment presents any faults, firstly check
whether they are listed under "Troubleshooting".
In case the problem cannot be solved, turn off
the
equipment, unplug
source
outlet and call Dabi Atlante Authorized Technical
Assistance.
Sensitivity to predictable environmental
conditions in normal working
situations
This equipment is not sensitive to magnetic, electric,
electrostatic or pressure interferences as long as
the cleaning, maintenance, transportation and
08
Dabi
Atlante
Authorized
it from
the
operation recommendations found in this manual
are observed.
Procedures in case of equipment
disposal
When the equipment is put out of use, it must be
disposed of at an appropriate site (according to local
regulations), thus preventing its inadequate use and
environmental contamination.
Transportation and storage
conditions
The equipment must be transported and stored:
•
Carefully in order to prevent falls and impact.
•
By keeping the side indicated by the arrow
facing upwards.
•
By observing maximum piling limits as indicated
on the packaging.
•
Protected against moisture, rain, waters
prinkling and wet ground.
Transportation/storage environmental conditions
Transportation and storage
environmental temperature
range
Transportation and storage
relative humidity range
Atmospheric pressure range 500hPa to 1060 hPa (375
After installation
Keep the equipment protected from sunlight and rain.
Environmental operation conditions
Environmental temperature
functioning range
power
Environmental temperature
range recommended by Dabi
Atlante
Functioning relative humidity
range
Atmospheric pressure range 700 hPa to 1060 hPa (525
0ºC to + 55ºC
0 % t o 9 0 % ( n o n -
condensing)
mmHg to 795 mmHg)
+10ºC to +35ºC
+21ºC to + 26ºC
30% to 75% (non -
condensing)
mmHg to 795 mmHg)