Dabi Atlante COBRA CONTRA ANGLE INTRA 32 CA Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Dental equipment Dabi Atlante COBRA CONTRA ANGLE INTRA 32 CA. Dabi Atlante COBRA CONTRA ANGLE INTRA 32 CA 20 pages.

Print Page

OPERATION OF EQUIPMENT

External cooling system

Fit the cooling kit in the contra angle - fig. (a) e (b).

In order to remove it, do the opposite.

PRECAUTIONS, RESTRICTIONS AND WARNINGS

Recommendations for preserving the equipment

Your Dabi Atlante equipment has been designed and developed according to the standards of

modern techology. Similarly to other kinds of equipment, it requires special care, which is many times

neglected due to several reasons and circunstances. Therefore, here are some important reminders

for your daily routine. Try to follow these simple rules, which will save you a lot of time and will

avoid unnecessary expenses once they start making part of your working procedure.

Transportation, storage and operation

This equipment must be transported and stored observing the following directions:

- Avoid falls and impacts;

- Keep it dry, do not expose it to rain, water drops or wet floor;

- Keep it away from water and direct sunlight, and in it original wrapping;

- Don't move it over irregular surfaces, protect it from rain and observe the maximum stack quantity

specified in the packaging;

Environmental condition for transportation or storage:

- Room temperature range for transportation or storage -29ºC to +60ºC.

- Relative humidity range for transportation or storage 20% to 90%.

- Atmospheric pressure range 500hPa to 1060 hPa (375 mmHg to 795 mmHg).

Environmental operation condition:

- Room temperature range for functioning +10ºC to +40ºC.

- Recommended room temperature range +21ºC to +26ºC.

- Relative humidity range for functioning 30% to 75%.

- Atmospheric pressure range 700 hPa to 1060 hPa (525 mmHg to 795 mmHg).

- Operation altitude: ≤2000m.

ATTENTION

The Equipment maintains its condition of safety and efficacy, provided that it is maintained (stored)

as mentioned in this instruction of use. Thus, the equipment will not lose or alter its physical and

dimensional features.

fig. a

fig. b