DoorKing 1620-081 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Control Systems DoorKing 1620-081. DoorKing 1620-081 16 pages. Surface mount vehicular lane barrier accessory

Print Page
Layout
Counterweight
Assembly
6" Min
Secure stop posts to the concrete
using 3/4" x 3" minimum,
1" x 3" maximum
sleeve anchors
(not supplied).
Sleeve
Anchor
Photocell Beam
3/4
Secondary Barrier Arm (Up Position)
Stop Post
6"
Use 3000 psi reinforced concrete. It MUST be flat.
Min
DO NOT install directly on asphalt.
1620-065-G-8-20
Arm Up
33.5"
Arm Channel
Wire Mesh
WARNING
MOVING ARM
can
cause vehicle damage,
serious injury or death.
STAY CLEAR
of arm
at all times.
NO:
Pedestrians
Bicycles
Motorcycles
Reverse/LED Edge
Sleeve
Anchor
Cut off excess threads flush
with top of nut on the
sleeve anchors that will
come in contact with tires.
Note: Can be installed on existing concrete roadway (no asphalt).
4
Secondary Barrier
Arm Positions
Counterweight
Assembly
(see previous page)
Octagon Arm Down
Secure arm channels to the
concrete using 1/2" x 3" sleeve
1/2
anchors minimum (not supplied).
Wire Mesh
Drawings NOT to scale.
Install arm channel
sections so arm is
centered in channel.
Arm Down
Arm Channel
Wire Mesh
Secondary Arm
See previous page.
WARNING
MOVING ARM
cause vehicle damage,
serious injury or death.
STAY CLEAR
at all times.
NO:
Pedestrians
Bicycles
Motorcycles
CONFORMS TO
ANSI/UL-325
CERTIFIED TO
CAN/CSA C22.2 NO. 247
VEHICULAR GATE OPERATOR
CLASS
HP
MODEL
SERIAL
VOLTS
PHASE
AMPS
60 Hz
MAX GATE LOAD
DoorKing, Inc., Inglewood, CA
Moving Gate Can Cause
Serious Injury or Death
KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.
Stop Post
can
of arm
53382
6"
Conduit