Canon PIXMA MX512 Setup Manual - Page 14

Browse online or download pdf Setup Manual for All in One Printer Canon PIXMA MX512. Canon PIXMA MX512 22 pages. Guide for printer setup for network [spanish version]
Also for Canon PIXMA MX512: Getting Started Manual (4 pages), Installation Manual (7 pages), Setup Manual (3 pages), Fax Setup (2 pages), Specification (2 pages), Setting Up (29 pages), Installation Manual (17 pages), Manual (4 pages), (Spanish) Guía De Configuración (22 pages)

Print Page
Canon PIXMA MX512 Setup Manual
When using multiple access points.
Select Use multiple AccessPoints, then press the OK button.
An Unknown Access Point is Displayed
Access points in use nearby may also be detected.
The Access Point Name is Not Displayed Properly
Access point names with double-byte characters are not displayed properly. However, they can be selected.
The Access Point Name is Not Displayed Automatically
Refer to the manual supplied with the access point or contact its manufacturer.
The Network Password is Not Displayed Automatically
Refer to the manual supplied with the access point or contact its manufacturer.
WPA/WPA2
Failed to connect to the access point. Check the access point settings and try again.
Make sure that the passphrase entered for the access point is correct.
If the problem is not resolved, there may be other causes.
See also the sections below:
If the DHCP function of the access point is inactive, enable the DHCP function and confi gure wireless connection
settings again.
For details on how to check or change the settings of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
WLAN setting list
If the MAC address fi ltering is enabled on the access point, change settings so that the MAC address of the printer
will be accepted.
Follow the procedure below to check the MAC address of the printer.
1. Press the MENU button.
2. Select Setup, then press the OK button.
3. Select Device settings, then press the OK button.
4. Select LAN settings > Confi rm LAN settings > WLAN setting list to check MAC address.
For details on how to change the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.