Canon PIXMA MX700 Series Network Setup Manual - Page 12
Browse online or download pdf Network Setup Manual for All in One Printer Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 32 pages. Office all-in-one printer
Also for Canon PIXMA MX700 Series: Cleaning Manual (7 pages), Supplementary Manual (6 pages), Setup Instructions (2 pages), Brochure & Specs (2 pages), Technical Information (2 pages), Service Manual (44 pages)
Print Page
2-B Setting up an additional LAN-connected
computer
This section describes how to set up an additional computer to use the machine over wired LAN,
when the machine has already been set up to connect to the network using another computer. This
setup procedure only requires settings to be performed on the additional computer.
1
Make sure that the machine is connected to
the network device with a LAN cable, then
turn on the machine.
When the machine is turned on, the Power lamp
lights up green.
Note
If MAC or IP address filtering is configured to restrict
access to the machine, make sure beforehand to
register those addresses of the computer you are
setting up.
Make sure that the computer you are setting up is
not connected to the machine with a USB cable.
This setup procedure does not involve connecting
the USB cable.
2
On the Setup Method screen, select Set up
only the computer for network use, then
click Next.
12