Canon PIXMA MX700 Series Service Manual - Page 36
Browse online or download pdf Service Manual for All in One Printer Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 44 pages. Office all-in-one printer
Also for Canon PIXMA MX700 Series: Cleaning Manual (7 pages), Network Setup Manual (32 pages), Supplementary Manual (6 pages), Setup Instructions (2 pages), Brochure & Specs (2 pages), Technical Information (2 pages)
Print Page
<Ink absorber counter setting>
Set the ink absorber counter value to a new EEPROM after the logic board is replaced in servicing.
1) Before replacement of the logic board, check the ink absorber counter value in EEPROM information print.
2) In the ink absorber counter setting mode, press the Stop/Reset button the specified number of time(s) according to the ink absorber
whose counter value should be transferred to the replaced new EEPROM.
Time(s)
0 times
Main ink absorber
1 time
Borderless-print ink absorber
2 times
Both the main and borderless-print ink absorbers
3 times or
Not valid
more
3) Press the ON/OFF button to proceed to the next step.
4) The ink absorber counter value can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the
appropriate number of time(s) to select the value which is closest to the actual ink absorber counter value.
Time(s)
0 times
0%
1 time
10%
2 times
20%
3 times
30%
4 times
40%
5 times
50%
6 times
60%
7 times
70%
8 times
80%
9 times
90%
Not valid.
10 times or more
Press the ON/OFF button to return to the ink absorber counter setting
mode.
5) Press the ON/OFF button to set the selected value to the EEPROM. Print EEPROM information to confirm that the value is
properly set to the EEPROM.
Ink absorber
Ink absorber counter value to be set (%)
34 / 41
Remarks
Reset to 0%
Reset to 0%
Reset to 0%
Press the ON/OFF button to return to the ink
absorber counter setting mode.