Akva-Stabil Effect-Line Assembly Instructions Manual - Page 11

Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Akva-Stabil Effect-Line. Akva-Stabil Effect-Line 12 pages. Aquarium racks

Print Page
Mount the set with the 2 low slide rails at the bottom of
the shelving unit.
Mount the high slide rail over the filter.
The slide rails must lie
flush with the front edge of
the shelving unit.
You must now mount the
vertical cover strips
to the whole shelving unit.
Mount 3 stop blocks on
each door.
Just click the strips into
their tracks on the front
of the shelving unit. The
strips are designed for easy
removal if this should be
necessary.
On unit sides which are to be fitted with an end panel,
stick the two angles to the base of the shelving unit.
For covered unit sides,
mount a vertical cover strip
on the rear of the shelving
unit.
Next mount the front cover
strip.
Place the end panel on the
angle fittings and push in
against the vertical cover
strip at the rear.
long
short
The top 4 horizontal cover
strips must be positioned as
shown.
11