DoorKing 1601 Series Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Automatic Barriers DoorKing 1601 Series. DoorKing 1601 Series 8 pages. Break-away octagon arm installation kit
Also for DoorKing 1601 Series: Manual (5 pages), Installation Manual (11 pages)
Print Page
Plug in Break-Away Switch (REQUIRED) and Reverse Edge (Optional)
Option #1
Reverse Edge Plug (Optional)
Secure ALL Wires to
Bracket and Install Cover
Note for Older Covers:
See page 6.
Zip Tie
1601-269-D-2-20
Break-Away Switch Plugs
(Required)
Option #1
IMPORTANT:
Allow for some slack in the reverse
edge wire to account for the arm pivoting when arm
"Breaks Away" from bracket. Test break-away
feature to make sure there is enough slack wire.
Note: The reverse edge plug is not used
when not installing a reverse edge.
Break-Away Switch (REQUIRED)
IMPORTANT: Break-Away switch is located between the
release rollers and MUST be connected to wire harness.
DO NOT OPERATE ARM WITHOUT
BREAK-AWAY SWITCH FUNCTIONING.
IMPORTANT:
Make sure that all wires remain clear of
the pivoting arm and the plastic cover.
Zip Tie
4
Option #2
Break-Away Switch Plugs (Required)
Reverse Edge Plug (Optional)
Use included zip ties to secure ALL
wires to break-away arm bracket.
Option #2
Allow for some slack in the
reverse edge wire to account for
the arm pivoting when arm
"Breaks Away" from bracket. Test
break-away feature to make sure
there is enough slack wire.