DoorKing 1601 Series Installation Manual - Page 10
Browse online or download pdf Installation Manual for Automatic Barriers DoorKing 1601 Series. DoorKing 1601 Series 11 pages. Break-away octagon arm installation kit
Also for DoorKing 1601 Series: Owner's Manual (8 pages), Manual (5 pages)
Print Page
REVERSE EDGE / RED GREEN LED INSTALLATION
This kit is designed to install on a 14 ft aluminum octagon arm for a 1601 barrier gate operator.
It CANNOT be used with a 1602 or 1603 operators.
Note: DO NOT operate arm with a malfunctioning reverse edge.
Installation
2
Slide on Spacer
Tip: Liquid soap will help
spacer slide on easier.
3
Slide on Edge
Tip: Liquid soap will help
reverse edge slide on easier.
3
Reinstall End Cap
Push a screwdriver through the hole in cap to release
spring while pushing cap on. Keep pushing cap on
until a "CLICK" is heard which locks it in place.
1601-269-G-7-21
1
Remove End Cap
Push a screwdriver through hole
in bottom of end cap to release
spring while pulling cap off.
Spacer MUST be
used or edge will
slide in slot.
10
DoorKing Part Numbers
8080-080
8080-096
Reverse Edge + Red/Green LED
Octagon Arm
Spacer MUST be used or
edge will slide in slot.
Reverse/LED Edge
Cover
Spacer
Reverse/LED Edge
120 S. Glasgow Avenue
Inglewood, California 90301
Reverse Edge
Spacer
U.S.A.