Canon PIXMA MX850 Network Setup Manual - Page 33
Browse online or download pdf Network Setup Manual for All in One Printer Canon PIXMA MX850. Canon PIXMA MX850 43 pages. Multifunction brochure
Also for Canon PIXMA MX850: Supplementary Manual (6 pages), Setup Instructions (2 pages), Brochure (2 pages)
Print Page
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
Cannot Install the MP Drivers
Cause
Unable to proceed beyond the Printer
Connection screen.
Installation does not start automatically
when the Setup CD-ROM is inserted
into your computer's disc drive.
If you were unable to proceed beyond the Printer Connection screen, make
sure that the USB cable is securely plugged into the USB port of the machine
and is connected to the computer, and then follow the procedure below to
reinstall the MP Drivers.
In Windows Vista, "The printer is not detected. Check the connection." may
be displayed depending on the computer you use. In this case, wait for a while.
If you still cannot proceed to the next step, follow the procedure below to
reinstall the MP Drivers.
(1)Click Cancel on the Printer Connection screen.
(2)Click Start Over on the Installation Failure screen.
(3)Click Back on the screen that appears next.
(4)Click Exit, then remove the CD-ROM.
(5)Turn the machine off.
(6)Restart the computer.
(7)Make sure you have no application software running.
(8)Follow the procedure described in "Setting Up the Machine and the
Computer (Windows)" on page 1 to reinstall the MP Drivers.
(1)Click Start then Computer.
In Windows XP, click Start then My Computer.
In Windows 2000, double-click the My Computer icon on the desktop.
(2)Double-click the CD-ROM icon
If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.
(1)Double-click the CD-ROM icon
installation.
Note
If the CD-ROM icon is not displayed, perform the following.
– Remove the CD-ROM from your computer, then insert it again.
– Restart your computer.
If the icon is still not displayed, try different discs and see if they are displayed. If
other discs are displayed, there is a problem with the Setup CD-ROM. Contact
your Canon service representative.
Action
on the displayed window.
displayed on your desktop to start
Troubleshooting
31