Canon PIXMA MX870 Series Network Setup Manual - Page 15

Browse online or download pdf Network Setup Manual for All in One Printer Canon PIXMA MX870 Series. Canon PIXMA MX870 Series 34 pages. Setting up in default mode (tel priority mode) without an answering machine
Also for Canon PIXMA MX870 Series: Installation Manual (17 pages), Install Manual (11 pages), Network Setup Manual (16 pages), Brochure (2 pages), Network Installation Manual (24 pages), Network Installation Manual (17 pages), Setup Manual (15 pages), Setting Up (15 pages)

Print Page
Canon PIXMA MX870 Series Network Setup Manual

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the completion screen appears, press the OK button.
•
The LAN settings screen returns. Press the COPY button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired
Setup" and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired LAN
Inactive
TCP/IP setting
Obtain an IP address automatically