Air Dry Ground Mounted Assembly Instructions Manual - Page 5

Browse online or download pdf Assembly Instructions Manual for Racks & Stands Air Dry Ground Mounted. Air Dry Ground Mounted 8 pages. Clothesline

Print Page

www.airdryclotheslines.com.au

Step 6:

Assembling the arms/ strut mechanism

Parts required:

•

2 x 120mm bolts

•

2 x 80mm bolts

•

2 x 60mm bolts

•

6 x Nuts

•

2 x Large 45mm spacer

•

4 x Small 10mm spacer

•

2 x Arms

•

2 x Struts – insert 12/12 small end caps

Working from the outside to the middle, thread the

120mm bolt (A) through the arm (B) followed by the

45mm spacer (C). Insert the bolt through the top hole

on the post (D) and finishing by locking with a nut (E).

Working from the outside to the middle, thread the

80mm bolt (F) through the top of the strut (G)

followed by a 10mm spacer (H). Making sure to have

the strut spring facing backwards, thread the bolt

through the second hole on the post (D) and finishing

by locking with a nut (I).

Working from the inside to the outside, thread the

60mm bolt (L) through the hole at the bottom of the

strut (G) followed by the 10mm spacer (K). Insert the

bolt through the second hole in the arm (B) and finish by

locking with a nut (J). See Figure 6. This eliminates the

end of bolt rubbing on the posts. Tighten all nuts once

the arms section has been assembled.

