Astralpool KEFREN Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Swimming Pool Filter Astralpool KEFREN. Astralpool KEFREN 12 pages. Inground and half-inground bin
Also for Astralpool KEFREN: Instruction Manual (12 pages), Installation Manual (12 pages)

Print Page

5. USER MANUAL

ATTENTION

ALWAYS STOP THE PUMP BEFORE CHANGING THE POSITION OF THE

SELECTOR VALVE.

5.1. FILTRATION

With the pump stopped, put the selector valve handle on FILTER. Start up the pump.

Periodically check the manometer during operation, which will indicate the degree of

saturation of the filter.

5.2. WASH

The solid particles in the pool that are collected by the sump and the skimmers

remain in the sand in the filter, which constantly decreases the water flow. Due to

this, the pressure increases progressively. When the pressure reaches 1.3 kg/cm

, a

WASH will be done (this is an approximation; it depends on the distance between

the unit and the pool, its location, etc.).

Proceed as follows:

Put the selector valve in the WASH position and start the pump. Run this for 2

minutes. Always check the window of the selector valve to ensure that this is the

correct time, since it depends on the amount of dirt accumulated in the filter.

1.3 kg/cm2 - 18.5 PSI: This pressure indicates when it is necessary to proceed with a WASH