ASTRALVISION 70” Installation Manual - Page 2
Browse online or download pdf Installation Manual for Touchscreen ASTRALVISION 70”. ASTRALVISION 70” 3 pages. Led touchscreen
The Mounting Plate System:
Your Touchscreen is supplied with a mounting plate. The 2 arms are already attached to
the Touchscreen & the plate is wrapped & packed in with the Touchscreen.
Your Touchscreen is supplied with mounting bracket, and a full range of accessories is
included with the Touchscreen and are detailed in the Quick Start Guide. Installation is a
relatively simple process but a qualified Installer is recommended to ensure the mounting
bracket is properly attached to the wall.
The Touchscreen is quite heavy so it is recommended that the Touchscreen only be
attached to a masonary wall using the bolts provided in the Touchscreen accessory box. If
attaching to a plasterboard or timber wall, the wall mounting plate should be attached
directly to wall framing studs. If this is not possible, adequate horizontal timber beams
should be attached to the studs & the mounting plate attached to the timber beams. Your
installer will be able to determine the appropriate size of timber beam based on the size/
weight of your Touchscreen, and span between supporting studs.
The Touchscreen is normally installed so that the bottom edge of the Touchscreen is
approximately 80cm from the floor. This can be varied to suit your needs, particularly if
you have young or disabled users. The mount plate should be positioned in the centre of
the Touchscreen; it is recommended you use removeable tape to mark out the position of
the Touchscreen on your wall so your can accurately locate the mounting plate, ensuring
it is level, & mark the wall for the bolt locations.
Ensure that you have considered the position of cabling & power for use with the Touchscreen
before you drill the wall to mount the plate. Remember that a few cms of space are
required above the plate to enable the lifting and positioning of the Touchscreen.
Once the mount plate is installed, the Touchscreen is simply lifted onto the bracket. Ensure
you have an extra person to check that the arms are properly engaged on the mount plate
while it is being lifted into position.
The pic shows the mount plate
& brackets together. The
mount plate installation
orientation so the horizontal
lips are pointing upwards.