ASTRALVISION 84” Installation Manual - Page 2

Browse online or download pdf Installation Manual for Touchscreen ASTRALVISION 84”. ASTRALVISION 84” 3 pages. Led touchscreen

Print Page

The Mounting Plate System:

Your Touchscreen is supplied with a mounting plate. The 2 arms are already attached to

the Touchscreen & the plate is wrapped & packed in with the Touchscreen.

Your Touchscreen is supplied with mounting bracket, and a full range of accessories is

included with the Touchscreen and are detailed in the Quick Start Guide. Installation is a

relatively simple process but a qualified Installer is recommended to ensure the mounting

bracket is properly attached to the wall.

The Touchscreen is quite heavy so it is recommended that the Touchscreen only be

attached to a masonary wall using the bolts provided in the Touchscreen accessory box. If

attaching to a plasterboard or timber wall, the wall mounting plate should be attached

directly to wall framing studs. If this is not possible, adequate horizontal timber beams

should be attached to the studs & the mounting plate attached to the timber beams. Your

installer will be able to determine the appropriate size of timber beam based on the size/

weight of your Touchscreen, and span between supporting studs.

The Touchscreen is normally installed so that the bottom edge of the Touchscreen is

approximately 80cm from the floor. This can be varied to suit your needs, particularly if

you have young or disabled users. The mount plate should be positioned in the centre of

the Touchscreen; it is recommended you use removeable tape to mark out the position of

the Touchscreen on your wall so your can accurately locate the mounting plate, ensuring

it is level, & mark the wall for the bolt locations.

Ensure that you have considered the position of cabling & power for use with the Touchscreen

before you drill the wall to mount the plate. Remember that a few cms of space are

required above the plate to enable the lifting and positioning of the Touchscreen.

Once the mount plate is installed, the Touchscreen is simply lifted onto the bracket. Ensure

you have an extra person to check that the arms are properly engaged on the mount plate

while it is being lifted into position.

The pic shows the mount plate

& brackets together. The

mount plate installation

orientation so the horizontal

lips are pointing upwards.