AMES 1000a Owner's Manual And Safety Instructions - Page 14
Browse online or download pdf Owner's Manual And Safety Instructions for Measuring Instruments AMES 1000a. AMES 1000a 16 pages. Ac/dc trms digital clamp meter
Print Page
Diode Measurement
Test voltage drop in diodes�
WarninG! To prevent electric shock, turn
off all power and fully discharge capacitors
on the circuit under test before measuring�
1�
Plug black test lead into cOM Jack�
Plug red test lead into input Jack�
2�
Turn the Rotary Switch to the
Ω
position�
3�
Press Func until
capacitance Measurements
Measure capacitance up to 99�99mF�
WarninG! Turn off all power and fully
discharge capacitors on the circuit
under test before measuring�
1�
Plug black test lead into cOM Jack�
Plug red test lead into input Jack�
2�
Turn the Rotary Switch
to the
position�
Page 14
is displayed�
For technical questions, please call 1-888-866-5797.
4�
Connect red probe to diode's anode
and black probe to its cathode�
5�
Read measured forward-biased
voltage drop on the Display�
note: If the test leads are reversed
or open, OL is displayed�
6�
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter�
3�
Carefully touch capacitor
leads with tips of probes�
4�
Read measured capacitance
on the Display�
5�
When testing is complete, turn
Rotary Switch to OFF, remove
and store capacitor and Meter�
Item 64017