AMES 64016 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Measuring Instruments AMES 64016. AMES 64016 16 pages. 200a ac fork meter

Print Page
Low Impedance Measurement
Eliminate ghost voltages.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
2.
Turn Rotary Switch to Loz position.
Dc Microamp current Measurement
Test thermocouple-based flame sensors.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
2.
Turn Rotary Switch to μA position.

Resistance Measurement

Measure circuit resistance up to 60MΩ.
WARNING! To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
Note: When measuring ohms, start with
lowest range if resistance is unknown.
Note; When measuring above 1MΩ, it may
take a few seconds for reading to stabilize.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
Item 64016
For technical questions, please call 1-888-866-5797.
3.
Carefully touch exposed
conductors with tips of probes.
4.
Read measurement.
5.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
3.
Press FUNc button until
μ A is displayed.
4.
perform test according to
appliance's owner's manual.
2.
Turn Rotary Switch to
3.
Carefully touch exposed
conductors with tips of probes.
4.
Read measurement.
Note: If resistance value is too
high, display will read OL.
5.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
position.
Page 11