Ames Instruments 64001 Owner's Manual & Safety Instructions - Page 7
Browse online or download pdf Owner's Manual & Safety Instructions for Analytical Instruments Ames Instruments 64001. Ames Instruments 64001 8 pages. Laser distance meter
Print Page
error Messages
The following error messages may appear on the Display during operation:
error code
err01
The reflected laser signal is too strong�
The distance to be measured falls outside
err02
the measuring range for this device�
err03
The reflected laser signal is too weak�
err06
Maintenance and Servicing
procedures not specifically explained in this manual
must be performed only by a qualified technician.
cleaning, Maintenance, and Lubrication
1�
Wipe unit with a dry, lint-free cloth�
Do not use solvents or abrasives�
2�
Remove battery if not in
use for long periods�
Battery replacement
If the
sign appears on the
Display or the unit will not turn on,
the battery should be replaced�
1�
Turn the unit over�
2�
Remove battery cover carefully�
calibration
Have the Meter calibrated by a qualified technician every year�
Item 64001
cause
Low battery�
For technical questions, please call 1-888-866-5797.
Change target or affix a white
sheet of paper to target�
Measure within the effective
measuring range (0�16' ~ 98�43')�
Change target or affix a white
sheet of paper to target�
Replace battery� See "Battery
Replacement" on page 7below�
3�
Store unit in a dry location�
4�
Other than the battery, there
are no replaceable parts on this
unit� repairs should be done
by a qualified technician.
3�
Pull batteries out of unit and
replace with same�
note: Do not reverse the
polarity of the batteries�
4�
Replace cover and retighten screw�
Solution
Page 7