Ames Instruments 63980 Owner's Manual & Safety Instructions - Page 10

Browse online or download pdf Owner's Manual & Safety Instructions for Thermometer Ames Instruments 63980. Ames Instruments 63980 12 pages. Dual input thermometer

Print Page
Measurement Operation
Temperature Measurement
Measure temperature from 32
to 1832
F (0
to 1000
°
°C
1.
Connect Thermocouple(s)
(included) to T1 and/or T2 Input,
following indicated polarity.
2.
Press Power Button to turn
Thermometer on.
3.
Set thermocouple type to be consistent
with attached Thermocouple(s).
Note: If Thermocouple is not connected
to selected Input, Thermocouple
is open, or temperature exceeds
measuring range, OL is displayed.
Data Hold
1.
Press HOLD button to hold reading
on Display. The
Maximum, Average, and Minimum Value Measurements
1.
Press MAX AVG MIN one time to
view maximum measurement.
2.
Press MAX AVG MIN two times to
view minimum measurement.
3.
Press MAX AVG MIN three times
to view average measurement.
Page 10
°F
C).
°
symbol appears.
For technical questions, please call 1-888-866-5797.
4.
Press Unit Selection Button to slect
appropriate termperature units.
5.
Touch the tip of the Thermocouple
to the object to be tested.
6.
Read measured temperature on
Display. By default, T1 measurement
is shown on main display and T2
is shown on auxiliary display.
7.
Press T1/T2/T1-T2 to switch position of
T1 and T2 measurements on Display.
8.
Press T1/T2/T1-T2 again to
display difference between T1
and T2 measurements.
2.
Press HOLD again to release the hold.
4.
Read maximum, minimum, or
average measurement on Display.
5.
Hold MAX AVG MIN to
return to normal mode.
Item 63980