Astria Fireplaces Brentwood LV Manual
Browse online or download pdf Manual for Indoor Fireplace Astria Fireplaces Brentwood LV. Astria Fireplaces Brentwood LV 2 pages.
Print Page
EPA Wood Burning Fireplaces
Specifications
PRODUCT REFERENCE INFORMATION
Model: Brentwood™ LV, Cat. No. H8295
Weight
Height
Width
Depth
Firebox W x H x D
22" x 11-
measured in front
3/4" x 12"
Chimney weight ASHT * (6" dia)
6.25 lb/ft.
Chimney weight AC * (6" dia)
3.25 lb/ft.
*
Available from Security Chimneys™
FRAMING DIMENSIONS
A
36-1/4"
921 mm
B
40-3/4"
1035 mm
C
28-1/8"
714 mm
D
13-1/4"
337 mm
E
76-3/4"
1950 mm
F
38-3/8"
975 mm
G
*25"
635 mm
H
24-1/2"
622 mm
J
54-1/4"
1378 mm
K
8"
203 mm
L
1"
25 mm
* Total depth is 25-1/2 inches including
the back spacer minus 1/2 inch for
drywall to be flush with the facing.
C
US
Report No. 14-180
Listed to ULC-S610 & UL-127
EPA certification test emis-
sion value 3.7 g/hr per 2015
standard
P/N 900165-00, REV. A, 04/2015
Brentwood™ LV
Back Wall of Chase/Enclosure
Including Finising Materials if any
L*
385 lbs
H
36"
36"
24-1/2"
Rough Framing Face (Unfinished Shown)
* Zero Clearance From Back Spacer to Wall
Combustible materials can NOT
be used in the space directly
above the fireplace. Do not fill
the space above the fireplace
with any material (Except the
wood framing)
Header
B
A
Fireplace Framing
28-1/8"
10-1/4"
22-7/8"
36"
OUTSIDE CHASE
C
G
A
2" x 3'
Min.
7'
Min.
Plywood 1/2"
Rough Framing Face
(dimension includes finish
material inside framing, if any)
1"
Diagrams, illustrations and photographs are not to scale – consult installation instructions.
Product designs, materials, dimensions, specifications, colors and prices are subject to
9-1/4"
change or discontinuance without notice.
13-7/8"
All framing dimensions calculated for 1/2" dry wall at the fireplace face. If sheathing the
24"
chase or finishing with other thickness materials, calculations will need to be made.
* The fireplace must not be in contact with any insulation or loose filling material. Cover
1-1/2"
the insulation with drywall panels around the fireplace.
40-3/4"
36"
Corner Installation
21-1/2"
D
F
20-3/8"
E
Combustion
Air Kit
K
Dimensions with clean face
obstruction plate kit installed
Notes
PARTS REqUIRED
• Finishing Kit - Required * (Order Separately)
- Louver kit
OR
- Clean face obstruction plate kit. Must be used in
conjunction with a gravity vent kit.
*SEE "INSTALLING THE FINISHING KITS" SECTION FOR
THE ASSEMBLY OF THE FINISHING KITS.
• Black steel door - Required (included w/fireplace)
• Outside air kit - Required (included w/fireplace)
• Blower kit with thermo-disc (included w/fireplace)
• 6" diameter chimney * - model ASHT+, S-2100+,
HT6000+, HT6103+ or AC manufactured by Security
Chimneys International only, including:
- Chimney lengths
- Elbows (where necessary)
3-3/4"
- Associated components per installation and
operation manual.
OPTIONAL EqUIPMENT
- AC chimney adaptor * (required if using AC chimney)
- AC chimney outside air kit
- Gravity venting system
- Central forced air kit
- Blower speed control
* Available from Security Chimneys™
J
Page 1 of 2