Canon XF105 White Paper - Page 11

Browse online or download pdf White Paper for Camcorder Canon XF105. Canon XF105 17 pages. Stereoscopic 3d
Also for Canon XF105: User Manual (2 pages)

Print Page

TIMECODE SYNC FOR XF105 CAMERAS:

• Connect a BNC cable from the GENLOCK/TC terminal of one camera to the GENLOCK/TC terminal of

the other camera.

• Set the TIMECODE MODE on both cameras to FREE RUN. You can set a custom preset timecode on

your designated 'master' camera before switching to FREE RUN but be aware that the TC will

continue to run whether recording or not.

• On the master camera enter the "Other Functions" and then "Genlock/TC Term" menu and select TC

OUT and press SET. Then on the slave camera enter the "Other Functions" and then "Genlock/TC

Term" menu and select TC IN and press SET.

Timecode will now be synchronized.

• Go back into "Other Functions" and then "Genlock/TC Term" menu and reset the input to genlock

input signal. Continue to the next step for GENLOCK SYNCING the cameras.

TIMECODE SYNC FOR XF305 CAMERAS:

• Connect a BNC cable from the TC terminal on one camera to the TC terminal of the other camera.

• Set the TIMECODE MODE on both cameras to FREE RUN. You can set a custom preset timecode on

your designated 'master' camera rst.

• On the 'master' camera enter the "TC/UB Setup" menu and then "Timecode" submenu and set TC IN/

OUT to "OUT. "

Slave Camera set to TC IN

• On the slave camera enter the "TC/UB Setup" menu and then "Timecode" submenu and set TC IN/

OUT to "IN. " Timecode will now be synchronized and you should see an "F" for Freerun on the

master camera and an "E" for external timecode on the slave camera.

You may also use an external timecode generator to provide timecode to both cameras and set them

to TIMECODE "IN" once connected.

XF300/305 Whitepaper

Tim Dashwood

Master Camera set to TC OUT

Stereoscopic 3D