Cognisys SCOUT Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Receiver Cognisys SCOUT. Cognisys SCOUT 18 pages.
Also for Cognisys SCOUT: Owner's Manual (20 pages)

Print Page

the

stop button will send the pulse programmed in the Camera Box to stop recording. Use

this mode for recording video on Canon or Nikon cameras.

Mode 3: Follow the Camera Box internal programming. If the camera box is set for "# pics: 2"

then you'll get two pictures every time you press the

press the

stop button in this case unless you want to abort the programming.

Press the

mode button to change the mode and you'll get one green LED flash for Mode 1,

and two flashes for Mode 2. Each mode button press will change the mode button. It ships with

Mode 1 as the default.

2.8 Record Button

Depending on the current mode, this button will either set the camera's shutter active or follow

the camera box's programming. The Remote's LED will indicate what the camera box is

currently doing (half-press: green, recording: red). If you get a fast flashing red LED that

indicates that communication wasn't successful with the camera box.

This button will turn off the camera's shutter or stop the currently running program.

2.10

The LED will follow what the camera box's camera settings are. If it is recording, the light will

turn Red. If it is waiting for the "Delay" time to expire, it will turn green. Just exactly like the

camera box.

If the LED flashes red that means that there was no communication with the camera box, or you

did something that didn't make sense – like pressing the

the

record button.

record button. You do not need to

stop button without first pressing