Canon CanoScan 9000F Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Scanner Canon CanoScan 9000F. Canon CanoScan 9000F 39 pages. Brochure
Also for Canon CanoScan 9000F: Quick Start Manual (19 pages), Brochure (8 pages)

Print Page

Scanning Film

This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below

when scanning film.

Remove the protective sheet from the

document cover.

Press and hold the lever at the top of the protec-

tive sheet

while you pull the sheet outward

and detach it

• Store the protective sheet in a safe place so

that it will not get bent or broken.

• Always put the protective sheet back when

you are not scanning film to protect the light

source in the document cover.

Insert the film into the Film Guide.

• Use a blower brush to remove any dust from the film, which will affect the image quality, and

take care to hold the film by its edges to avoid transferring dirt or fingerprints to it.

• Do not block the Calibration Slot on the Film Guide when scanning film. Colors will not be

scanned correctly if the Calibration Slot is obstructed.

• Close the Film Guide securely. Press lightly until it clicks into place.

35 mm Film Strips

Open the Film Holder on the Film Guide,

place the film face down.

Close the Film Holder.

Align the Film Guide's tab with the FILM

symbol on the platen glass of the scanner.

Ensure that there is no gap between the edge of the film and the Film Guide on the side near

the Calibration Slot.

Scanning Film

protective sheet

light source

Film Holder

Calibration Slot