Acer Altos T110 F4 Installation & Configuration Manual - Page 8
Browse online or download pdf Installation & Configuration Manual for Desktop Acer Altos T110 F4. Acer Altos T110 F4 10 pages.
Print Page
Altos T110 F4 Installation Configuration Guide
RED HAT ENTERPRISE
LINUX 7.3
Intel Onboard SATA (No RAID)
BIOS Required
Altos T110 F4 BIOS
Enterprise Linux 7.3.
Drivers Required
Device
Onboard VGA
Onboard Gigabit
Ethernet
Installation Tips
NOTE. Please refer to Altos T110 F4 FAQ (Frequently Asked
Questions) to select OS installation in EFI mode or Legacy
mode if the OS media supports EFI.
1.
Please boot the system from the Red Hat Enterprise
Linux 7.3.
2.
For legacy installation, at Welcome Menu, Please press
Enter.
3.
For EFI installation, when the following message shows
on screen, press any key to enter the boot menu
Press any key to enter the menu
4.
Select Basic Storage Devices and press Next.
5.
Follow the instruction to install.
6.
Select Software Development Workstation.
7.
Follow the normal procedure to finish the installation.
Gigabit Ethernet Driver Installation
Red Hat Enterprise Linux 7.3 has the built-in driver for
onboard Gigabit Ethernet. You don't need to install the
onboard Gigabit Ethernet driver manually.
VGA Driver Installation
Red Hat Enterprise Linux 7.3 has the built-in driver for
onboard VGA. You don't need to install the VGA driver
manually.
5
1.0b
(or later) can support Red Hat
Version
N/A
OS Built-in
N/A
OS Built-in
Driver Source