Doran 2200 Series Operator's Manual - Page 12
Browse online or download pdf Operator's Manual for Accessories Doran 2200 Series. Doran 2200 Series 15 pages.
Print Page
Display Preact Values
Press and hold the SET POINT button for three seconds to display the Preact weight
values. The last viewed or edited preact will be displayed. Press UNITS and PRINT to
scroll through the eight available setpoints. The annunciators below the main display
indicate the current setpoint. Press SET POINT to exit this mode, the display will read
abort to indicate no changes were made to the setpoint values.
Press ZERO to momentarily display the current parameter settings and output logic for
that individual preact.
Change Preact Values
Press and hold the SET POINT button for three seconds to enter the preact edit mode.
The last viewed or edited preact will be displayed. Press UNITS and PRINT to scroll
through the eight available preacts. The annunciators below the main display indicate
the current preact.
To change the preact value, enter the preact value using the numeric keypad. Press
ENTER to accept the change and return to the weigh mode or press UNITS or PRINT to
save and edit other preacts. Press SET POINT to exit this mode.
The display will read abort to indicate no changes were made to the preact values or
the display will read Saved to indicate the preact value is saved.
Barcode Entry of Preact Values
Press and hold the SET POINT button for three seconds to enter the preact edit mode.
The display will momentarily show PrEACt, then flash the current preact weight. Press
UNITS and PRINT to scroll through the eight available preacts. The annunciators below
the main display indicate the current preact.
Using Doran's optional barcode scanner, scan the desired barcode. The display will
read SAVEd to indicate the scanned preact weight is saved. The display will flash the
new preact weight scanned from the barcode. No special serial commands are needed
prior to the weight data in barcode value. The barcode value must not exceed the
indicator's count by resolution and can not be greater than the capacity. The barcode
value can be read into each of the eight available preacts. To exit the preact edit mode,
press the SET POINT button.
Display Accumulator and Counter Values
Press the ACCUM button to enter the accumulator and counter recall mode. The display
will show Accunn followed by the accumulated weight in the units currently selected in
the weigh mode. Then Countr will be displayed followed by the counter value.
Press ACCUM to exit the accumulator and counter recall mode without changing their
values.
12