Doran 2200 Series Operator's Manual - Page 9
Browse online or download pdf Operator's Manual for Touch Panel Doran 2200 Series. Doran 2200 Series 15 pages.
Print Page
The scale can be zeroed while in the net mode. Press ZERO and the scale will return to
the gross mode and will zero out any weight on the scale platform. The stored tare
value will remain in memory.
The indicator is equipped with a Zero on Demand parameter, which saves the ZERO
push button command and zeros the scale upon the next stable reading. This option
may be activated during the scale setup procedure.
Push Button Tare
To use Push Button Tare, simply place the tare item on the scale platform and press
TARE. The scale will store the tare weight of the item. The net weight is displayed
The TARE weight will remain in memory, even if the indicator is turned off.
Digital Tare Entry
Enter the tare weight value through the numeric keypad, press TARE to save the tare
weight. After the tare weight is stored, the scale will show the net weight.
The tare must be a positive, non-zero weight. If any errors are made while entering the
tare weight, press CLEAR and reenter the weight.
The TARE weight will remain in memory, even if the indicator is turned off.
Tare Recall
To recall the tare weight at any time, press and hold TARE push button for 3 seconds.
The display will momentarily show tArE, then flash the tare weight in the currently
selected units. To exit this mode press CLEAR.
Clear Stored Tare Value
To clear a tare weight press 0 on the keypad then press TARE. This will remove the
tare from memory.
If not cleared, the TARE weight will remain in memory, even if the indicator is turned off.
Barcode Entry of Tare Value
Press and hold TARE push button for 3 seconds to recall tare weight. The display will
momentarily show tArE, then flash the tare weight.
Using Doran's optional barcode scanner, scan the desired barcode. The display will
read SAVEd to indicate the scanned tare weight is saved. The display will flash the new
tare weight scanned from the barcode. No special serial commands are needed prior to
the weight data in barcode value. The barcode value must not exceed the indicator's
count by resolution and can not be greater than the capacity. To exit the recall mode,
press the TARE button.
9