Flying Industry Development S2T-DC09-ANT2 Quick Manual - Page 2

Browse online or download pdf Quick Manual for Remote Control Flying Industry Development S2T-DC09-ANT2. Flying Industry Development S2T-DC09-ANT2 2 pages. Rf wireless remote control radio controller / transmitter & receiver

Print Page
Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Application Circuit
Signal LED
IC
Power LED
Relay 2
C
B
A
Lamp 2
DC0~28V / AC110~240V
A, B=Normally Closed; B, C=Normally Open.
Button
Antenna
Relay 1
_
+
C
B
A
Lamp 1
Power supply
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymary.com
Application: For DC12V motor or lamp
Signal LED
IC
Power LED
Relay 2
C
B
A
+
M
Motor 2
Power supply
Button
Antenna
Relay 1
_
C
B
A
+
+
M
Motor 1
_
+