Canon imageFORMULA DR-M160II Service Manual - Page 17
Browse online or download pdf Service Manual for Scanner Canon imageFORMULA DR-M160II. Canon imageFORMULA DR-M160II 36 pages.
Print Page
J.
Periodic Maintenance (End-User)
The parts in the table below must be periodically: replaced and/or cleaned, to
ensure a specific level of machine performance. These parts are likely to
affect the performance once they fail even in the absence of external change
or damage. Whenever possible, the customer/end-user and/or the service
technician should plan periodic replacement and/or cleaning as described in
the below table to maintain peak scanning quality.
WARNING
When cleaning the scanner, turn OFF the power switch and disconnect
the power cord from the power outlet.
Do not use spray cleaners. Precision mechanisms, such as the light
source, may get wet, and cause a malfunction.
Never use paint thinner, alcohol, or other organic solvents to clean the
scanner. The exterior of the scanner may become deformed, discolored,
or melted. Such solvents may also cause a fire or electric shock.
Table 14 – Periodic Maintenance
Item
Main Body
Reading Glass
Retard Roller
Feed Roller
Other Rollers
Feed Path
K.
Firmware Upgrade
Firmware can be downloaded by the end-user or service technician via a USB
cable that is connected to a computer.
Firmware is available for download on the Canon USA public Web Site
(http://www.usa.canon.com/cusa/support/office/).
machine, make sure to go to the Canon USA public Web Site, and download
the most recent firmware.
imageFORMULA DR-M160II Service Guide
Interval
As
200,000
necessary
sheets
∆
∆
∆
●
∆
●
∆
∆
imageFORMULA DR-M160II Service Guide
Details
Use a cloth slightly dampened with water and
well wrung out to remove any dirt, and then use a
clean, dry cloth to wipe the main body.
Use a soft, clean, and dry cloth to wipe off any
dirt.
Use a cloth slightly dampened with water and
well wrung out to remove any dirt, and then use a
clean, dry cloth to wipe the main body.
Note: Remove the retard/feed roller from the
main body before cleaning.
Use such as air blowers to remove any dust and
paper particles that have accumulated on the
feed path.
When
servicing
the
June 2014
Page 12