DOREGRILL Neol Quick Instruction Manual - Page 2

Browse online or download pdf Quick Instruction Manual for Kitchen Appliances DOREGRILL Neol. DOREGRILL Neol 2 pages.

Print Page

CLEANING

The NEOGRILL rotisserie has been designed to simplify the cleaning :

- Hygrometry and ventilation reduce the « overcooked grease » phenomenon.

- The enamel panels avoid grease to stick.

- The full heating and cooking process from the top of the rotisserie neutralizes the smoking phenomenon

considerably.

- The components of the rotisserie are fully dismountable to make the cleaning process fast and easy : baskets,

internal enamel panels, stainless steel deflectors, sauce drawer, door gutters.

Dismounting for cleaning (Neogrill / Neol)

We consider a cleaning process duration of 15min. on average.

Internal : accessories

Remove the baskets

- Remove the baskets support as follows :



Turn the motor OFF so that the flat part of the support axis is vertical.



Lift the central axis until full disengagement.

- Free the hooks maintaining the enamel panels on right and left hand sides. Remove the panels.

- To put the component back together, place the central axis back in its original position.

Automatic cleaning system (Steambox / Concept Neobox)

This cycle is a helping cleaning system that make steam during 15 minutes inside of the rotisserie

Procedure:

 Connect the rotisserie oven to the plumbing using a flexible hose with a standard stainless steel female connector piece,

attaching it to the male connector under the oven

 Turn on the tap

 Remove all the accessories which need to be hand-washed (spits, cradles and central support if necessary)

 Switch off all programmes and functions. Only the light 1 must be on (see plan on page 7)

 Start the cleaning cycle (button 5). The ""Time" display will show 15 minutes

 At the end of the cycle, run a sponge over the entire surface

 Empty the fat tray using the drainage plug. Do not forget to place a container underneath.

Important:

It may sometimes be necessary to run the cleaning cycle a second time, especially if using the oven intensively.

Please note that there is no need to use a cleaning product.

Heated display

Use

Switching ON

Turn the switch to 1

NB : (The switch is situated next to the lights)

Set the temperature on digital thermostat :

Each display has its thermostat set in the factory at 70°C.

To increase or decrease the temperature, do as follows :

Push twice on SET to get to set temperature, then increase or decrease with the

top or bottom

arrows until the desired temperature is reached.

(90°c max)