Astro-Gadget DobsonDream User Manual - Page 8

Browse online or download pdf User Manual for Controller Astro-Gadget DobsonDream. Astro-Gadget DobsonDream 8 pages. Push-to dsc controller

Print Page

Photo 9

If the connection was successful then the red rectangle will turn green, and by smoothly

moving the telescope you will see the corresponding crosshairs in the star field of the

planetarium program. Further, to make the planetarium "understand" where the telescope is

directed, it is necessary to make a telescope alignment on two stars. To do this, aim the

telescope at a previously known, bright star.

Right-click the same star on the planetarium screen, and click in the Telescope / Synchronize

menu that appears. Do the same with another star in advance. If during the transfer of the

telescope to another star it is found that the crosshairs on one or both axes are moving in the

opposite direction, change the sign in the corresponding field of the number of steps /

impulses of the encoders in position 6, 7 in photo 9 and perform the procedure of binding the

telescope to two stars again. If everything went well, then smoothly moving the telescope

tube you can start to make a fascinating tour through the infinite expanses of the universe.

Thank you for purchasing DobsonDream controller

Pleasant observations to you ....