Canon 9519B008AA Instructions Manual - Page 3

Browse online or download pdf Instructions Manual for Camera Lens Canon 9519B008AA. Canon 9519B008AA 13 pages. Image stabilizer

Print Page

Handling Cautions

If the lens is taken from a cold environment into a

● ●

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight plastic bag

before taking it from a cold to warm environment. Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment

into a cold one.

Do not leave the lens in excessive heat such as in a car

● ●

in direct sunlight. High temperatures can cause the

lens to malfunction.

When using this lens with an EOS REBEL T4i/650D

● ●

camera, please be sure to update the camera's

firmware to version 1.0.4 or later.

If the EOS REBEL T4i/650D firmware is an earlier

● ●

version than 1.0.4, there is a slight chance that the

camera will stop operating. If this occurs, please remove

the battery temporarily and insert it again for correct

camera operation.

For information on firmware updates, please check the

● ●

Canon website.

Do not look at the sun or a bright light source

● ●

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

Whether it is attached to the camera or not, do not

● ●

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun's rays, which could cause a fire.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

ENG-2