ASTRO-MED Dash 8Xe Quick Start Manual - Page 11

Browse online or download pdf Quick Start Manual for Data Loggers ASTRO-MED Dash 8Xe. ASTRO-MED Dash 8Xe 15 pages. Data acquisition recorder

Print Page

Show only Channel 1

Expand the time base

Scroll through the data

Cursors

Time measurements

using cursors

Amplitude

measurements

using cursors

Remove the cursors

Show entire capture

Using cursors to make measurements

Choose View >> 1 Channel from the menu bar to show only Channel 1.

Choose Display >> Compression from the menu bar. Press the digit "1".

Press OK.

Use DVD icons. You can jog forward or backwards through the data. You

can stop at any points of interest. Experiment scrolling forwards and

backwards.

Continue to scroll and stop the display when you have the trigger point (red

vertical line) in the middle of the display.

Press the A cursor icon. Slide the cursor just to the left of the trigger point.

Press the B cursor icon. Slide the cursor just to the right of the trigger point.

Choose View >> Status Text Format >> Relative Time from the menu

bar. Observe the time values shown at the bottom.

Choose View >> Show Channel Information from the menu bar.

Move Cursor B by sliding it to the right. As you move the cursor, observe

the change in values in the Channel Information window.

Press the A cursor icon and B cursor icon to remove them.

Choose Display >> Show All File from the menu bar to show entire

capture.

This completes the sample exercise.