Canon CN7x17 KAS S/P1 Operation Manual - Page 21

Browse online or download pdf Operation Manual for Camera Lens Canon CN7x17 KAS S/P1. Canon CN7x17 KAS S/P1 34 pages. Zoom lens
Also for Canon CN7x17 KAS S/P1: User Manual (31 pages)

Print Page

2.　How to operate the speed preset function

When the Sped switch is pressed, the zoom starts to move at the preset speed and to the determined

direction (toward telephoto angle or widest angle) stored in section 1 until the zoom reaches its end.

3.　How to cancel movement in Speed Preset

Movement in Speed Preset can be canceled by any of the following operations.

1） Press the "Sped" switch again.→ Zoom movement stops.

2） Perform zoom operation with the zoom rocker seasaw / the Shtl, Fr1P, Fr2P, Fr1F, Fr2F switch.

5-1-7. Framing Preset

There are three framing preset types based on how the settings are combined.

［Zoom］ :

This enables a predetermined picture angle and movement speed (zoom speed) to be reproduced easily.

［Focus］ :

This enables a predetermined focus and movement speed (focus speed) to be reproduced easily.

［Z+F］ :

This enables the movement speed (focus speed, zoom speed) to a predetermined focus and picture

angle to be reproduced easily. It must be set on the information display.

Preset

Frame1:

Zoom

Frame2:

Zoom

ZSpeed:

800

NOTE

Up to two framing presets, Frame1 and Frame2, can be set in the memory. Only Frame1 is described in the

description given on the following pages. Frame1 is indicated as Fr1P.

How to set the zoom speed to the framing memory position

Movement speed to the framing position is selected by assigning the Fr1P or Fr1F switch.

Fr1P---------- For the preset speed setting （preset speed） (Assigned to the AUX switch at the factory.)

Fr1F----------For the maximum speed setting （fast speed）

For details on how to assign the switches, refer to "5-6. Switch Operations".

Setting combinations

Frame preset

control

Zoom

Focus

Z+F

1 :

The zoom and focus are controlled in such a way that they start and stop simultaneously.

The framing preset setting is changed on the Preset screen on the infor-

mation display. The Frame1 setting is changed to Zoom, Focus, or Z+F.

Control content

Zoom operation

The zoom moves at the preset speed.

control

Focus operation

The focus moves at the maximum speed.

control

Zoom + focus

The zoom and focus move at the preset speeds.

operation control

Movement speed setting

Fr1P, Fr2P

(speed settable)

E15

5 OPERATION

Fr1F, Fr2F

(maximum speed)

The zoom moves at the maximum speed.

The focus moves at the maximum speed.

The zoom and focus move at the

maximum speed.