ASTRO-PHYSICS 1565GTO Maintenance Instructions Manual - Page 6
Browse online or download pdf Maintenance Instructions Manual for Keypad ASTRO-PHYSICS 1565GTO. ASTRO-PHYSICS 1565GTO 17 pages.
Closing the Keypad
When placing the back onto the unit, make sure the screws are aligned with the proper holes. start by aligning the two
screws on one side of the display. the four screws on the display end must pass through the display circuit board before
engaging in their posts.
make sure that all wires, fibers and cables will be safely inside the unit.
if you have unplugged anything, be sure that it is correctly plugged
back in.
note the spacer washers in place on their screws!
1. line up the display end before moving to the cable end of the
keypad.
2. the cable strain relief may need to be held and guided gently
into the cutout in the case to finish mating the two halves.
Make a final check to be sure that no wires, fibers or
cables are caught between the front and back halves of
the keypad.
3. carefully apply a small amount of pressure to hold the back down while
tightening all six screws.
4. Reinstall your keypad protector (KeYPRo) using the instructions refer-
enced earlier.
5