AIR GUARD AG-1000 User Manual - Page 10

Browse online or download pdf User Manual for Vaporizers AIR GUARD AG-1000. AIR GUARD AG-1000 13 pages. Antibacterial vaporizer

Print Page

Transmitter battery replacement

If the effective distance seems to decrease, it is possible the battery level is low and requires

replacement. In order to replace the battery, undo the three screws on the back of transmitter to

release the cover. Replace with the same type and specification of battery which is 27A 12V

Fluid

Service and Maintenance

Do not allow the machine to become contaminated.

․

Remove dust from air vents with air compressor, vacuum or a soft brush.

․

Only use a damp cloth to clean the casing.

․

Before storing run distilled water through the system to help prevent condensing the pump or

․

heater.

It is recommended to run the machine on a monthly basis in order to achieve best

․

performance and output condition.

Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

․

Breaker Reset

Disconnect AC power before resetting the breaker. Only replace fuse with same type

and rating.

Step 1: Disconnect AC power.

Step 2: Flip breaker to ON position.

Step 3: Turn on machine for testing.

Breaker

100-120V = 8A 250V

220-240V = 4A 250V

Use Air Guard Antibacterial Solution for AG-1000. The machine is

tested and calibrated with these authorized fluids to achieve the best

performance. Warranty will be void, if any other type of liquid is used.

Improper use of liquid may lead to machine failure and danger.