COLBOR CL220M User Manual - Page 4
Browse online or download pdf User Manual for Lighting Equipment COLBOR CL220M. COLBOR CL220M 15 pages. Video light
Print Page3. Installation and fixation of light
Rotate the lamp holder screw until the inner wall not shielded and put the
product on the top of the lamp holder to tighten the bracket screw for fixation.
Adjust the lamp body irradiation Angle and tighten the lamp holder Angle grip
fixed.
Screw out, the inner
Halfway the screw out
The screw is not out
wall of the bracket
at all
without any shelter
4. Install the soft light cover
Insert the handle of the soft light umbrella into the umbrella hole. After
adjustment, lock the cover hole screw.
Screw out, the inner wall of the
The screw is not out at all
soft light cover without shelter
5. Power Connection
(1) Mount the power adapter
Do not suspend the power adapter in the air. Use
wire rings to hang it on the lamp stand.
(2) Power with power adapter
Connect the power adapter, align the pin with the
DC power interface of the lamp body, and then
power through the cable
after stable.
(3) Power cord storage
Please turn off the lamp before unplugging
the power cord. When unplug the power
cable, hold down the safety lock on the
connector before removing it. If unlocked,
do not forcibly remove the power supply.