coldline ICE550M-HA User Manual - Page 11
Browse online or download pdf User Manual for Ice Maker coldline ICE550M-HA. coldline ICE550M-HA 13 pages.
Print PageClean Function
Note: Please empty the bin of ice in
advance.
Note: Please clean and sterilizing the
bin and do complete rinsing.
Note: Please clean and sterilizing the
ice sliding board, water distribution pipe,
water supply pipe, water pump, then do
complete rinsing.
Turn on the ice maker; push "clean"
button for 3 seconds, the ice maker will
get into clean process. Put in proper
amount of clean solution manually
followed by the clean and sterilizing
process instruction.
Push "clean" button. The ice maker will
do auto clean for about 15 minutes.
Please do spray cleaning to the
evaporator at the mean time to insure a
Service Call
If the ice machine works abnormally, please
confirm below before making a service call:
1. Check the water supply
whether there is water in the water
trough;
whether the water pressure for the ice
machine is 0.13MPa to 0.55MPa; the
water temperature is 5-35 °C;
whether the water valve is open;
whether there is no water leakage;
2. Check the power
whether the indicator on the display panel
is ON;
whether the panel display does not
display the OFF standby state;
USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE
complete clean. When finished, the led
display flashes "Clean" slowly again.
Put in proper amount of sterilizing
solution manually followed by the clean
and sterilizing process instruction. Push
the "clean" button again, the ice maker
will do auto sterilizing for about 15
minutes. Please do spray sterilizing to
the evaporator at the mean time to insure
a complete sterilizing. When finished, the
ice maker will get into rinsing process,
the process will take about 5 minutes，
and do 5 cycles rinsing.
The ice maker will get back to do ice
making as soon as the clean process
end.
Please throw away the next 5 batches
ice in case of cleaner remained.
If the LED on the display panel is not ON,
check whether the plug and socket are
normal, and whether the power supply
switch is ON.
3. Check nameplate and series number
Check the nameplate located on the side
or back of the ice machine and record the
model and series number of the ice machine.
Note: If the machine fails due to the
user's faults, such as no supply of water,
electricity or environmental factors, rather
than the fault of the ice maker, the door-to-
door service will be charged.
9